[sdiy] Ken stone's synthacon filter

[James R. Coplin]

The output on my Cyndustries version is really low as well. Must be a design
thing.

James R. Coplin
***************
If anyone asks of my whereabouts,
simply tell them i've gone out the window
for a spot of tea and am not
expected back any time soon.
***************

> -----Original Message-----
> From: owner-synth-diy at dropmix.xs4all.nl [mailto:owner-synth-
> diy at dropmix.xs4all.nl] On Behalf Of Karl Ekdahl
> Sent: Saturday, September 11, 2004 10:55 AM
> To: synth-diy at dropmix.xs4all.nl
> Subject: [sdiy] Ken stone's synthacon filter
> 
> Hi all, i'm having some trouble with Ken Stone's
> synthacon..  The thing is that the output is really
> low and noisy sometimes, and sometimes it's clean.
> Apparently a bad part and/or cable, but if anyone
> could supply me with any basic testpoints and what
> reading i *should* get i might not have to completely
> re-solder the whole unit...  I tried following the
> schematic and measure different points with my scope,
> but i get nothing at all (i have an old scope and no
> probe). Any ideas anyone?
> 
> Karl
> 
> Höstrusk och grå moln - köp en resa till solen på Yahoo! Resor på adressen
> http://se.docs.yahoo.com/travel/index.html