[sdiy] tempcos..

[James Patchell]

Thanks Fritz...I forgot about that...maybe you should post a link to your 
website as damion might be able to make good use of that information.

At 07:40 PM 8/31/2004 -0600, Ian Fritz wrote:
>Not offhand, but easy enough to find for you.  :-)
>
>They call them Panasonic Metal Film Thermosensitive Chip Resistors.
>Page 865 in current catalog (T041)
>Part # is:    P + Value + "CDCT-ND",   if you use the 3300ppm/.1W variety.
>Price is 10/$5.52.
>
>Values only go up to 1.8k, so you can either modify your circuit to use 
>1.8k instead of 2k, or you can use 2 x1k in series, or you can use a 
>circuit designed for 1k.  My dial-a-tempco circuit can be set up for any 
>convenient tempco value.
>
>   Ian
>
>
>At 07:12 PM 8/31/2004, James Patchell wrote:
>>Do you know the Digikey part number...of hand?....
>>
>>At 07:04 PM 8/31/2004 -0600, Ian Fritz wrote:
>>>Don't forget the little surface mount ones that Digikey carries.  Only 
>>>~60c IIRC.  Self heating could be an issue, but still probably worth trying ...
>

         -Jim
***************************************************************
http://www.oldcrows.net/~patchell

***************************************************************