[sdiy] Pot and Jack Washers Source Please

[John L Marshall]

Here in Seattle, there is a hardware distributor "Tacoma Screw" that has 3/8 
inch thin washers and nuts in bins on the floor. They are exactly the kind 
required for pots and 1/4 inch jacks. Another interesting compnay is the 
"All Metric Company".

Check your Yellow Pages. I bet that most large cities have similar 
distributors.

Take care,
John

----- Original Message ----- 
From: "Ray Wilson" <raywilson at comcast.net>
To: "Synth-Diy" <synth-diy at dropmix.xs4all.nl>
Sent: Saturday, October 16, 2004 9:15 PM
Subject: [sdiy] Pot and Jack Washers Source Please


> Hi List
>
> Does anyone have a source for the thin little washers for mounting 3/8" 
> pot shafts and 1/4 jacks? Not the star or knurled ones just the plain old 
> thin flat ones.
>
> Ray