[sdiy] MIDI bass pedals project

Tim Parkhurst tparkhurst at siliconbandwidth.com
Tue Oct 12 23:10:53 CEST 2004


Very nice job! Nice synth patch on the audio file too. Congrats!



Tim (Bass instincts) Servo

"Imagination is more important than knowledge." - Albert Einstein




> -----Original Message-----
> From: David Brown [mailto:davebr at earthlink.net]
> Sent: Monday, October 11, 2004 10:02 PM
> To: synth-diy at dropmix.xs4all.nl
> Subject: [sdiy] MIDI bass pedals project
> 
> I've been working on building a set of MIDI bass pedals.  I got the
> mechanism from a Hammond T series organ.  I rebuild the pedals which was
> mostly to deal with the rust, dirt, and missing springs.  I modified the
> switch PCBs to provide 13 switches on a common bus.
> 
> I designed a small PCB with a processor that supports MIDI in and out
along
> with a 4 line to 16 decoder for the key switches.  I've got it all running
> although I have yet to build a cabinet for it.  I'm trying to decide how
> many features to add to the code before I build the cabinet.  So far I
have
> a normal key mode, a sticky key mode where the notes hold until the next
> key, and a basic arpeggiator.  The processor has four A/D channels so I'm
> debating about adding some analog controls.  I was going to drive both
MIDI
> and CV/Gate/Trig but I think I'll just stick with MIDI.
> 
> The DB-9 connector is for programming from my PC so I can easily update
the
> code.
> 
> Photos of progress at
> http://home.earthlink.net/~dabr/davebr/MOTM/DJB%20Bass%20Pedals/
> 
> Dave
> 
> 
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.776 / Virus Database: 523 - Release Date: 10/12/2004
> 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.776 / Virus Database: 523 - Release Date: 10/12/2004
 



***************************************************************************
This message is confidential.  The information contained in
this e-mail message is intended only for confidential use of the
recipient(s) named above. If the reader of this message is not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this document in
error and that any review, dissemination, distribution, or copying of this
message is strictly prohibited.  If you have received this communication in
error, please notify us immediately by e-mail, and delete the original
message.
***************************************************************************





More information about the Synth-diy mailing list