[sdiy] Soldering to Aluminum

[Ken Stone]

There is a way to solder to aluminium using regular 60/40 solder too. It
does work, though smells a bit. The method is simple - prevent oxygen from
touching your freshly cleaned aluminium. How? wack some thick oil on it.
Scrape it clean through the oil, then solder it, also through the oil. As I
said, it stinks, but it does work!

Ken

>Need opinions on doing this...I have had very mixed results in the 
>past...specifically, what I need to do is solder a stainless steel part to 
>an aluminum part...both metals are iffy to begin with.  Anybody ever do 
>this?  I found a flux searching on the interenet ( Superior Flux 1206) 
>which is supposed to be able to do this.  So far, I have found no place to 
>purchase it.
>
>
>         -Jim
>***************************************************************
>http://www.oldcrows.net/~patchell
>
>***************************************************************
>
>
>
_______________________________________________________________________
Ken Stone   sasami at hotkey.net.au or sasami at cgs.synth.net
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>