[sdiy] Module Placement - Dist > Filter or vice versa

[William Berzinskas]

also, another question..   when driving 2 things in a parallel config, what's needed at the split of the signal?  just a resistor on each side?   and then a simple summing circuit on the output of the 2? 
  ----- Original Message ----- 
  From: John L Marshall 
  To: William Berzinskas ; synth-diy at dropmix.xs4all.nl 
  Sent: Thursday, November 18, 2004 12:41 AM
  Subject: Re: [sdiy] Module Placement - Dist > Filter or vice versa


  They could also be driven in parallel then mixed. Each configuration would have a different effect. Modulars;-)

  Take care,
  John

  Pacific Northwest Synth Meeting September 25, 2004
    ----- Original Message ----- 
    From: William Berzinskas 
    To: synth-diy at dropmix.xs4all.nl 
    Sent: Wednesday, November 17, 2004 9:26 PM
    Subject: [sdiy] Module Placement - Dist > Filter or vice versa


    Hey all

    A semi related question.. maybe something i should just try, but i'd like some input from the list.. 

    i'm building a simple efx unit using a few things lying around..  i've got 2 distortion units  selectable via switch..   one is tube overdrive sim and the other strait distortion.   i'm also going to add a cd4007 based filter in there..

    just wondering what would be the "preferred" placement..  filter first or distortion first.. 

    anyone? 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20041118/414df1dd/attachment.htm>