[sdiy] re: presets on a modular

[Ken Stone]

>On Freitag, 12. November 2004 19:32, larry at unicode.com wrote:
>> The original idea was to implement a limited preset system ON AN
>> EXISTING MODULAR SYNTH such as a Synthesizers.com, MOTM, Moog, or
>> other 1/4" jack based system.
>
>I've tentatively concluded that under these constraints the solution is 
>a computer controlled multichannel CV source plus a robot that pulls 
>and plugs the patches. If you have some pots in the system that can't 
>be replaced for whatever reason, the robot would have to deal with 
>those as well.

No problems...  here's your first component....

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&category=633&item=3851830100


Ken
_______________________________________________________________________
Ken Stone   sasami at hotkey.net.au or sasami at cgs.synth.net
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>