[sdiy] presets on a modular

[Ian Fritz]

At 02:20 AM 11/13/2004, Don Tillman wrote:
>.......
>This only addresses the module interconnection aspect of a patch, it
>doesn't deal with knob values.  But it might be a good thing to
>separate the two.

But if you include lots of VC mixers, then you can set some of the patching 
using them, ie setting a level to zero is the same as pulling out a patch 
cord.  My hybrid is patched at two level: (1) switch closures (2) mixer 
levels.  Seems to be reasonably effective, although a bit involved on the 
abstract conceptual level.

   Ian