[sdiy] LM394 vs. MAT02 vs. ?

[James Patchell]

This has been my experience of late as well....however, FUD seems to always 
make me go through the process anyway...

At 02:53 PM 11/9/2004 +1100, Ken Stone wrote:
>For what it's worth, I had to match some 2N3906's for a project that
>required several pairs. I went though the process of matching them at a
>constant temperature etc. As it turned out, I could have just used the
>"Reach into a bag of 2n3906's.  Pull one out." method, as they all proved to
>be practically identical. Obviously manufacturing tollerances have improved
>somewhat since the bad old days.
>
>Ken
>
> >This is the official ARP method:
> >Reach into a bag of 2n3904's.  Pull one out.
> >Reach into a bag of 2n3906's.  Pull one out.
> >Stick them together.
> >Repeat.
> >
> >-Dana
>_______________________________________________________________________
>Ken Stone   sasami at hotkey.net.au or sasami at cgs.synth.net
>Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
>Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

         -Jim
***************************************************************
http://www.oldcrows.net/~patchell

***************************************************************