[sdiy] problematic sh101

[Rude 66]

unfortunately, no scope here. no room for one either.. but since it's mostly
in 'power down mode' when it's on, i should be able to trace where the power
stops, so ican at least narrow down the section where the problem should
be..

r./




----- Original Message -----
From: "Roy J. Tellason" <rtellason at blazenet.net>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Sunday, November 07, 2004 1:28 AM
Subject: Re: [sdiy] problematic sh101


> On Saturday 06 November 2004 06:02 pm, Scott Gravenhorst wrote:
> > You might want to check power with an Oscope at various points while
> > flexing whatever causes it to fail.  If you can make it fail and it's
power
> > related, that should be quite apparent.  A meter might work too, but if
you
> > have an Oscope, I think that's a better tool for this purpose.  Set it
to
> > DC, horizontal sweep freerun.
>
> Agreed!
>
> You will see stuff on a scope that a meter won't even notice...
>
>