[sdiy] problematic sh101

[Rude 66]

thanks for all the help so far. it doesn't seem to be on the PS board, but
i'll check it first since it's so small..;-) the problem looks like it's on
one of the 2 main boards, but since that little one is also mounted into the
case, it could be that playing with the case would make that go. the toruble
spot seems to be around where that sequencer board is though, which is also
where the power on/off switch is. the first little multicable that connects
both boards seems to hold the power traces.  i'll look there too..

there goes another quiet saturday night..;-)

r./


But the first place I'd
> look is right near the powersupply jack... there's no mechanical support
> for that jack on the SH-101... all of the strain is on that little circuit
> board it's soldered to.   I've fixed quite a few solder connections here
on
> my both mine and several friend's SH-101s   It's unfortunate that roland
> didn't put some support on the jack boards.  They seem to develop cracked
> joints on the power supply, headphone and line out jacks all the time.
>
> Dave
>
> Resonant Frequency:
> resfreq at hoohahrecords.com
> http://www.hoohahrecords.com/resfreq/index.html
>