[sdiy] trig + gate ANDing?

[gregory zifcak]

actually, yours is the inspiration for my design! i thought that the trig 
and gate signals went to separate outs. now i'm looking more closely at the 
example of the mix out and it looks like what i'm after. so if there were 2 
consecutive switches in the up position it would output 50% width gates?

>From: sasami at hotkey.net.au (Ken Stone)
>To: "gregory zifcak" <zifcak at hotmail.com>
>CC: synth-diy at dropmix.xs4all.nl
>Subject: Re: [sdiy] trig + gate ANDing?
>Date: Sat, 6 Nov 2004 08:09:25 +1100
>
> >hi,
> >is there a simple way to use logic to provide a combination of staccato 
>and
> >legato gates at a single sequencer gate output? let's say i'm using a 
>4017,
> >and i AND the outputs with the clock to provide distinct gates for
> >consecutive steps. i'd like to use a center-off spdt on each step to 
>select
> >between the ANDed staccato and the straight legato output of the 4017. 
>any
> >suggestions?
>
>Here's my take on the problem.
>
>http://www.cgs.synth.net/modules/gate_sequencer2.html
>
>Cheers,
>
>Ken
>_______________________________________________________________________
>Ken Stone   sasami at hotkey.net.au or sasami at cgs.synth.net
>Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
>Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/