[sdiy] Rack chassis

[Peter Grenader]

Vector (the Vectorboard poeple) make 3ru and high IEEE standard components.
Basically, you can build a Doepfer rack chassis sans the PSU on the cheap
and the stuff is real real good.  Depending on what parts you purchase, you
can make these taller than 3ru.  Also, if you don't wish to use the IEEE
inserts (hole spacing)  you just slip them out of the rails and insert nuts
in there instead.  That way you can slide them to wherever you need.

it's a cool system.

- P



rack oveloe wrote:

Does anybody know a company that manufactures inexpensive 19² rackmount
chassis in Canada or the States? I already know where to order nice labeled
front panels, but I¹m still searching for the chassis, that metal body that
usually screws on to the front panel with 4 screws.

Thanks

Charles




http://www.oveloe.com
Voltage-Controlled Brain Waves



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20041102/d6bbf75e/attachment.htm>