[sdiy] Rack chassis

[mark s]

ok i am totally OVER the search for rack chassis', have done the fair share 
of research. this is the verdict: if u for some reason reallly need a 16" 
depth, you have to go with Sescom's flimsy 35-piece modular construction 
kit AND wait a month and a half to get it (YMMV) and then realize that you 
lose 1/4" of front and rear panel height due to the rails that hold it 
together.  harry is going to have me for lunch for saying this.

middle atlantic makes a GORGEOUS box in TWO different depths.

http://www.middleatlantic.com/rackac/chassis/chassis.htm#2

the CH series is really nicely done, do spring for it if you want the pro look.

and.....highly recommended vendor: www.markertek.com


mark s
finally found $.02 to spend here



At 02:36 AM 11/2/2004, you wrote:
>sescom.com
>
>H^) harry
>
>oveloe wrote:
>
> > Does anybody know a company that manufactures inexpensive 19"
> > rackmount chassis in Canada or the States? I already know where to
> > order nice labeled front panels, but I'm still searching for the
> > chassis, that metal body that usually screws on to the front panel
> > with 4 screws.
> >
> > Thanks
> >
> > Charles
> >
> >  -------------------------------------------------------------------
> > http://www.oveloe.com
> > Voltage-Controlled Brain Waves
> >