[sdiy] Siel Cruise problem: how to fix? --UPDATE--

[Rutger Vlek]

Hello,

after taking a good break, and going over the circuit boards one more time i 
finally found a solution to one of the problems. From one IC on the 
controllerboard there was a pin bent, so it did not connect in the socket. 
Some stupid technician must have caused that in the past, together with some 
very bad soldering (and wire-bridges). I resoldered al those points and 
removed the bridges, and fixed this IC's pin. Now my problem with choosing 
the instrument groups is solved! Yesssssss.

Only 2 problems remain:

1. The very long release times and (sometimes) no response to the fader that 
controls the release. This happens mostly on the strings and on the brass. 
No problem with the piano and organ sounds.

2. Spit function works strange for the poly section. From the keys that are 
NOT assigned to the poly section i cannot start a polysound, but when i hit 
a key in the assigned poly section and simultaniously press a key in the 
NON-assigned area i still hear it! Very strange...

Perhaps someone knows from experience what it could be?

Thanks,

Rutger

_________________________________________________________________
Hotmail en Messenger on the move 
http://www.msn.nl/communicatie/smsdiensten/hotmailsmsv2/