[sdiy] PCB cutting tool?

[Paul Perry]

At 08:58 PM 2/05/04 -0400, you wrote:
>    I'm throwing together a little stompbox and I'll probably end up using
>some cheap Radio Shack PCB for it. I'll probably have to cut it down to
>size. Is there a preferred tool for this? What about methods? Do I just cut
>it up? I'm just worried about cracking the whole thing.
>
Depends on the material, is it that brown phenolic (brittle)
or that green fiber glass resin?

If the latter, scratch with a tile cutter & then snap
(don't breathe the dust).
If the former, use a hacksaw.

paul perry Melbourne Australia