[sdiy] Midi continious controller gennerators / controler surfaces?

[bill berzinskas]

I've been working on a circuit based on pic 16f877..  it takes midi in and decodes it..  it also uses an lcd and a few buttons for interface.. the menu lets u setup midi channel, and assign CC#'s to the DAC's..  (which are MAX518.. )..  It would work with up to 8 DAC's but 'im only running 4 right now..   

Paul Maddox <P.Maddox at signal.qinetiq.com> wrote:scott,

> OK, so who's got a circuit that goes "the other way"? I'm in need of
> a circuit that will take MIDI out from a knob-box (like the Evolution
> U-16) and generate CVs for controlling my synth. I don't need note
> on/off or gates, just continuous controllers, maybe aftertouch too.
> 16 CV outputs, at least.

There's a few out there, Paia do one, Im not sure if you can have it all
midi CC thought.

Paul



---------------------------------
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20040311/9c7770d8/attachment.htm>