[sdiy] Advices for ringmod and noise source

[harrybissell]

and a CD4070 quad x-or gate would give you four (similar) ring mods
in one 14pin IC...

H^) harry

Tim Parkhurst wrote:

> > -----Original Message-----
> > From: Linium [mailto:intent at netpratique.fr]
> > Sent: Wednesday, June 23, 2004 6:37 PM
> > To: synth-diy at dropmix.xs4all.nl
> > Subject: Re: [sdiy] Advices for ringmod and noise source
> >
> > Thank you everybody for all the answers i gathered ! :)
> >
> >
> > A very simple design from ARP:
> > http://www.simple-answer.com/ARPring.gif
> >
>
> Just remember that the ARP design works ONLY with (0 to +10V max) square
> wave inputs. It's basically a logic circuit.
>
> Tim (a little square at the edges) Servo
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.676 / Virus Database: 438 - Release Date: 5/3/2004
>
>
> ***************************************************************************
> This message is confidential.  The information contained in
> this e-mail message is intended only for confidential use of the
> recipient(s) named above. If the reader of this message is not the intended
> recipient or an agent responsible for delivering it to the intended
> recipient, you are hereby notified that you have received this document in
> error and that any review, dissemination, distribution, or copying of this
> message is strictly prohibited.  If you have received this communication in
> error, please notify us immediately by e-mail, and delete the original
> message.
> ***************************************************************************