[sdiy] AR Times

[Charles Brodeur]

Hey Dan and all others interested,
 The attack time is very short, about 1 second to 1.5 seconds. The
release time is much longer, I haven't timed it exactly, but it is on
the order of something like 10 seconds, I believe. I'll try and get the
module powered up and give you some more accurate readings. Also, I
believe you can increase the size of the cap to get longer times.

The CV range is small and will probably have to be scaled. I believe it
is in the 2 to 5 volts range, but again I'll have to power it up to
test it.

Sorry about the vague numbers, I'll try to get better ones if you're
still interested.

Also, for anyone else, the design is here:

http://www.sdiy.org/cbrodeur/

-Charles Brodeur

--- Oskar Meier <schierld at msoe.edu> wrote:
> Charles--
> hey, its dan from the SDIY list. I don't have a good answer re: your
> sequencer question, but I do have a question about the A-R generator
> you
> show on your site. That looks great, I've been thinking about
> building a
> couple of these, and was looking for a circuit with a low parts
> count...the design I had thought of going with had about 3 times the
> parts! So--what kind of attack and release times are you seeing? and
> what
> is the range of CV you see at the output?
> 
> thanks!
> dan
> 



	
		
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail