[sdiy] Sound Lab Mini Questions

[john mahoney]

Mine is close to completion -- all that remains is to solder the front panel
leads to the PC board -- so I will know Real Soon Now (TM) how well it
turned out. ;-)

Regarding R & C values, the short answer is "Yes, you can make
substitutions." Actually, Ray addressed this. Look here:
http://www.musicfromouterspace.com/analogsynth/SOUNDLABMINISYNTH/soundlab.html#PARTSLIST
--
john


----- Original Message ----- 
From: "Gabriel Lindeborg" <gali at tiscali.se>
To: "diy" <synth-diy at dropmix.xs4all.nl>
Sent: Thursday, June 17, 2004 3:26 PM
Subject: [sdiy] Sound Lab Mini Questions


> I finaly has taken the time to start bulding the Ray's Sound Lab Mini
> (http://www.musicfromouterspace.com) and have some initial questions:
> Should all the pot's be linear?
> Is it okey to use standard values on resistors and caps (ie 2,2uF
> instead of 2uF)?
> Can the mpf102 be exchanged w. bf245(B or C)?
> Any ideas on this are welcome...and if some of you who has finished your
> SLMs has anything other to point out, please do so.
>
> //Gabbe of Sweden