[sdiy] OT: Paging Jim Patchell

James Patchell patchell at cox.net
Thu Jun 17 02:03:56 CEST 2004


Well, here is the last thing I got from you, and the reply that I sent...

Copy of last sent email:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Actually, I got email #1....and I spaced on that one, now that I see it (I 
had a medical proceedure done last week, I spaced on quite a few 
things....), but message number two I don't remember ever seeing....

1. I am going to order, most likely, 500 peices, so there will be plenty to 
go around ( I figured that will be my life time buy, I hope).  Even so, at 
that quantity, the pricing is not as good as it was.  I will probably have 
to sell them for between $3.25 to $3.50 each.

2.  The vocal filter does have a table of value changes that are different 
from the values printed on the silkscreen (but they should be the same as 
the ones in the schematic).  There is also a section on setting up the 
diode shapers that I think was new in that edition.

         And thanks for the notice on the broken link....I just hope I can 
remember that long enough to fix it....


         Oh yes, I still have not ordered the CA3280's yet...but I do need 
to do that...it is going to be a rather sizable purchase...and I am kind of 
a penny pincher.

         I am also starting to look into getting the NE5517's from 
ON.  Although, before I do anything, I want to see if Digikey is going to 
stock them.  (They are an ON distributor).


At 06:36 PM 6/15/2004 -0700, you wrote:
>Hi Jim,
>
>I hope this gets to you. Yes, they were sent to the the cox.net email 
>address. Here are the two messages that were of any importance:
>-----------------------------------------------------------------
>1.Hey Jim,
>
>If you are going to order CA3280s, put me down for about a dozen if the 
>price is reasonable. (Actually make it 18 - Scott)
>
>Scott Evans
>-----------------------------------------------------------------
>2.Hey Jim,
>
>Two things:
>
>1. I noticed that you updated the Vocal Filter pdf on 2-1-04. Since I have 
>not gotten around to building this circuit yet, are there any major 
>changes involved? It seems the board layout has not changed so I don't 
>have to worry about a new rev on that part. I did notice that there was an 
>addition to the pdf of "My Front Panel for My Synth". Is this the only 
>change? I can print out the new pdf and look, but thought you might have a 
>simple explanation.
>
>2. Broken link on:
>http://www.oldcrows.net/~patchell/synthmodules/synthmodules.html
>Under "Schematic" for Multi Segment Envelope Generator the "Yes" link 
>points to "synthmodules/Mevgen.pdf". Probably should point to 
>"synthmodules/1001008.pdf"
>
>Thanks, Scott Evans
>=================================================================
>James Patchell wrote:

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

I think I am going to have to talk to Cox Cable about  what seems to be an 
occasional lost email....I don't know if I am loosing them at the moment, 
but then, how would I know...



At 11:42 PM 6/15/2004 -0700, Scott E. wrote:
>Sorry again for the bandwidth...
>
>Jim, I replied directly to the email you sent me. Did it get to you?
>
>Scott Evans

         -Jim
***************************************************************
http://www.oldcrows.net/~patchell

***************************************************************




More information about the Synth-diy mailing list