[sdiy] Buchla 266 fluctuating voltages

[Peter Grenader]

John -

this is a GREAT webpage.  Thanks for putting this together.


john mahoney wrote:

> Hiya, kids! I was on vacation for a week, in Toronto with the Missus. So,
> there goes the neighborhood again. ;-)
> 
> 
> Here is a web page with 2 audio samples of the MM5837:
> http://www.ciphersbyritter.com/NOISE/NOISRC.HTM
> Listen to the long sample and the looping should be obvious.
> 
> This is a textbook case of something that measures well but sounds like
> crap! Look at the graph -- it shows a beautifully balanced frequency
> spectrum. As Harry wrote, the chip is useful for some things but it's lousy
> as a noise source for a synth.
> 
> The Korg Mono/Poly originally used the MM5837, but later models had analog
> noise sources.
> --
> john
> 
> 
> ----- Original Message -----
> From: "harrybissell" <harrybissell at prodigy.net>
> To: <music.maker at gte.net>
> Cc: <synth-diy at dropmix.xs4all.nl>
> Sent: Sunday, May 30, 2004 5:40 PM
> Subject: Re: [sdiy] Buchla 266 fluctuating voltages
> 
> 
>> Of course the 5837  (the only known chip to SUCK MORE than a bbd...) is
> the
>> perfect example of a too-short shift register with a too-low clock rate.
>> 
>> For its intended purpose, an audio noise source for room equalizing
> instruments...
>> the
>> warts will really not matter, its 'good enough' for 1/3 octave, yes ???
>> 
>> As a synthesizer noise source, it, well... sucks :^P
>> 
>> H^) harry
>> 
>