[sdiy] 4017 sequencer pulses

[Theo]

Second this see example attached (offlist)
Theo


----- Original Message -----
From: John Loffink <jloffink at austin.rr.com>
To: 'daryl groetsch' <synth_dg at yahoo.com>; 'Synth DIY List'
<synth-diy at dropmix.xs4all.nl>
Sent: Thursday, July 22, 2004 4:48 AM
Subject: RE: [sdiy] 4017 sequencer pulses


> AND the output pulses with the input clock.
>
> John Loffink
> The Microtonal Synthesis Web Site
> http://www.microtonal-synthesis.com
> The Wavemakers Synthesizer Web Site
> http://www.wavemakers-synth.com
>
>
> > -----Original Message-----
> > From: owner-synth-diy at dropmix.xs4all.nl [mailto:owner-synth-
> >
> > i am building a very simple percussion sequencer with
> > a 4017 cmos chip. each output goes to the input of a
> > 741 summing amp circuit. it works, except when
> > adjacent outs are used--the pulses run together into
> > one long pulse. so i think i need to shorten these
> > pulses. what is the most simple way of doing this?
> > thanks,
> > daryl
> >
> > =====
> > /----synthnoise|com----\
> >
>
>