[sdiy] DBX VCA chips info posted

[mark verbos]

I have some of these chips and I have taken apart my DBX 266, replaced 
the VCA on one channel with a THAT 2150, and one of these. I could 
notice no difference between the 2 channels with the original VCA or 
either of these replaceents. I from this ****VERY**** scientific test, 
conclude that Harry is correct that these are the same. (didn't I tell 
you that Harry?)

rock on guys,

Mark



J. Larry Hendry wrote:

>I believe that several of us bought these DBX VCA chips from Michael Bacich.
>I have gathered and posted all relative information so far about these.  You
>will find:
>
>- The Japanese data sheet courtesy of Sam H
>- The THAT Corp data sheet that Harry (I hate
>    BDDs) believes is a compatible part
>- block diagram and schematic of the DBX160x
>   compressor that uses these VCAs as sent to
>   me by Michael.
>
>http://www.wiseguysynth.com/larry/schematics/dbx_vca.htm
>
>Now, in the spirit of DIY, those who get something going with these should
>let me know so I can post it for you or link to it if you have it posted.
>Those are so far down my to-do list, they may not see the light of day until
>2005.
>
>Larry Hendry
>
>
>
>  
>