[sdiy] Another new hard to find part....

[karl dalen]

--- René_Schmitz <uzs159 at uni-bonn.de> skrev: > Hi Paul and R.D.

> I would in tendency agree 1.27mm chips are no problem, I've even done 
> 0.65mm pitched chips. Discretes in 0806 or similar sized outlines are 
> easy to work with. SMD has one big pro, you don't have to turn over the 
> PCB that often, and pinch off wires, so that you can work quicker.
> But if you try some BGA chips, the honeymoon is over!

Ha! BGA is the easiest to solder and to desolder, simply
use a paste mask and oven for soldering, use a heat gun
for desoldering.

I find LQFP pain in in the rear end to solder, particularely
when pins exeed 32!!

Reg
KD

> 
> Cheers,
>   René
> 
> -- 
> uzs159 at uni-bonn.de
> http://www.uni-bonn.de/~uzs159
> 
> 
>  

Höstrusk och grå moln - köp en resa till solen på Yahoo! Resor på adressen http://se.docs.yahoo.com/travel/index.html