[sdiy] HP 202C Low Frequency Oscillator

[The Peasant]

Perhaps it's a "Bristol Spline" setscrew, which is like an Allen but ribbed 
(for more pleasure, I'm sure) almost like a torx bit.

Take care,
Doug
______________________
The Electronic Peasant

www.electronicpeasant.com


Quoting Colin Hinz <asfi at eol.ca>:

> On Fri, 2 Jul 2004, Glen wrote:
> 
> > At 09:59 PM 7/1/04 , Colin Hinz wrote:
> >
> > >I've got a 201C and while I can *see* the set screw, and it sure
> > >looks like it's a 5/64" Allen, my Allen key of this size doesn't
> > >fit. Nor does +/- 1/64", of course......
> >
> > Have you tried a metric Allen key? (I know that HP is American, but some
> > American companies have been known to use metric hardware on occasion.)
> 
> I did try my (perhaps inadequate) metric set, but those didn't fit
> either. I wasn't terribly surprised, considering that the gear in
> question is American-made from the 1950s.
> 
> But maybe my 2mm key is bogus.....time to retry.
> 
> - Colin Hinz
>   Toronto, Canada
> 
> 
>