[sdiy] IC sub: 4136

[Czech Martin]

btw.: the 4136 will not latch if any input leg goes
goes to any rail. So, in a nonimverting application,
you have to observe this, too.

m.c.

> -----Original Message-----
> From: owner-synth-diy at dropmix.xs4all.nl
> [mailto:owner-synth-diy at dropmix.xs4all.nl]On Behalf Of Edu Silva
> Sent: Mittwoch, 30. Juni 2004 21:16
> To: synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] IC sub: 4136
> 
> 
> Hi all,
> 
> 
> 
> I wrote:
> >
> > If it's for an audio equipment, you'd better try some real good 
> > opamps, these 4136 sucks (not much better than the 741):
> >
> > http://www.tangible-technology.com/optical/LA4_article.htm
> 
> 
> Scott Stites wrote:
> > 
> > Be careful about that wild 4136 pinout if you're thinking 
> of subbing a
> > different part!
> 
>  
> 
> It's an adapter board, with two 8-pin ampops (SMD), to sub a 4136.
> 
> -- 
> abraços,
> 
> Edu Silva
> ES2 Audio
> Salvador-BA
>