[sdiy] Poteniometer nuts?

[Theo]

Just look for M7 nuts.
The 0,75 is the "speed" of the tread and not relevant here.
Normal M7 nuts will fit but probably be to high for your likening.
Maybe best try a electronics distributor (farnell, arrow) for the special
"flat" nuts used on pots.

Theo


----- Original Message -----
From: Speth, John <John.Speth at coherentinc.com>

> > Just took a look at your picture.
> > Looks like a standard model 16mm pot, made by multiple manufactures.
> > Usually those have a M7 nut.
>
> After some good advice and digging, I've concluded that the nut is
M7x0.75.  Search the web for such a nut turns up zilch.  I understand these
are pretty hard to find by themselves.
>
> Does anyone know where I can get some M7x0.75 nuts?
>
> John Speth
>