[sdiy] Reaktor and CV scaling...

[David Cornutt]

On Friday, January 23, 2004, at 07:51  AM, James R. Coplin wrote:

> The outputs *are* DC-coupled. I can output DC from panel knobs etc. no
> problem. The only problem is that the output range is around -4.7v to 
> 4.7v.
> Enough to be usable but not enough to open up my filters etc. on my 
> Serge or
> 2600 all the way up. A little amplification and I would be gold.

It wouldn't be hard to build an opamp circuit to re-scale the voltage.
But if you'd rather not, there is the Dotcom Q125 which has a control
voltage amplifier and offset circuit.