[sdiy] Reaktor and CV scaling...

[WeAreAs1 at aol.com]

Hello James,

Another thought on your Reaktor/CV setup -- It's unfortunate that your 2408 
interface is not DC-coupled at the inputs.   However, if you are using a MOTU 
MIDI Timepiece II or MIDI Timepiece A/V as your MIDI interface, they may be 
able to help.  Those units have a couple of control pedal input jacks, and will 
allow you to convert those pedal inputs into Continuous Controller MIDI data.  
I'm pretty sure that those pedal inputs will accept 0-5V control voltages.  
The MIDI data could then be routed into Reaktor to allow you to have it interact 
with external control signals.

Michael Bacich