[sdiy] EPROM Burning Question

[The Old Crow]

  I have an old MOD-EMUP which probably operates in a similar fashion.  
What you want to do is select "buffer to PC" so that instead of using the 
limited 8086 (real-mode 640K) RAM, it caches the binfile to disk.  I had 
similar problems trying to use RAM buffers for parts larger than 128K.

Crow
/**/

On Mon, 5 Jan 2004, Tim Curtis wrote:

> I've got an EPROM burner here on my PC - it's a "Modular Circuit 
> Technology MOD-MEP" - that I've been using with no problems whatsoever 
> thus far. 
> 
> This unit has software that runs under DOS and is rather archaic to be 
> honest.  It's software has you load a .bin file into a buffer before 
> programming the EPROM.  According to both the manual and the software 
> options, the buffer is selectable between 64K and 128K - obviously 
> smaller than some of the supported devices.