[sdiy] Wavetable info

[Tom Arnold]

On Thu, Jan 01, 2004 at 02:07:12AM -0600, Grant Richter wrote:
> The procedure is to use Sound Forge etc. to record anything at that
> frequency. Then export the file as an 8 bit raw PCM file longer than 64K
> (else Move256 will give a file under run error). Then pull the file into
> Move256 and look for zero crossing aligned at each end. Use Move256 to move
> the waveform into the wavetable you are building.

Oh, I have something far more evil planned.

I bought some 1024x480 tablet LCDs and have been playing with some code
for them to allow drawing one wave ala a wavetable entry...

Figure it might make a neat module...

-- 
 ------------------------------------------------------------------------
 - Tom Arnold -       When I was small, I was in love,                  - 
 - Sysabend   -       In love with everything.                          -
 - CareTaker  -       And now there's only you...                       - 
 --------------         -- Thomas Dolby, "Cloudburst At Shingle Street" -