[sdiy] looking for specific wires

[Scott Bernardi]

I picked up a multipurpose crimp tool for about $11 that works fine on 
the KK size molex connectors. I don't remember exactly where I got it, 
but this one from MPJA for $8.39 looks like it. If you were crimping all 
day your hands would get sore (non-ratcheting), but for the amount I do 
it fit the bill nicely without costing an arm and a leg.
http://www.mpja.com/productview.asp?product=11763+TL

harrybissell wrote:

>Molex makes a generic crimp tool for prototype use... about $35.  It works
>on
>most small pins (ampmodu, molex cc, etc)
>
>H^) harry
>
>Joseph Craig wrote:
>
>  
>
>>hey all,
>>
>>I'm in the hook-it-up phase of my sequencer project and I'm going from
>>panel controls to a uP evaluation kit with header pins.  From my
>>digital electronics lab I have some wires with the little crimp
>>connectors that slide onto the header pins but I need more.  I have
>>searched mouser, digikey and all over google to find more of these wire
>>but am having no luck.  I can't afford a $200 crimping tool to do it
>>myself.  Anyone know where I can find some of these header connector
>>wires to jump from my panel to my evaluation kit?
>>
>>-Joe
>>    
>>
>
>
>  
>

-- 
Scott Bernardi
sbernardi at comcast.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20040215/1225917e/attachment.htm>