[sdiy] Rack enclosures?

[Scott Stites]

Thanks Jim!

My company had an old, broken pedal operated shear on the loading dock last
week.  I briefly considered making an offer until I noticed the thing was
made of solid iron and probably weighed as much as my car!

Cheers,
Scott


----- Original Message -----
From: "James Patchell" <patchell at cox.net>
To: "Scott Stites" <scottnoanh at peoplepc.com>; "Synth-Diy"
<synth-diy at dropmix.xs4all.nl>
Sent: Tuesday, December 21, 2004 8:47 PM
Subject: Re: [sdiy] Rack enclosures?


> Take a look at these.
>
> http://www.lmbheeger.com/products.asp?catid=10
>
> Sure hope that gets you to the right place...I think Peter Grenader is the
> one who pointed these out.  A very flexible system.  Not as fexible as
> having a Shear, Brake and Notcher, but a lot cheaper...:-)
>
> At 09:15 AM 12/21/2004 -0600, Scott Stites wrote:
> >Hi List,
> >
> >Hope this wasn't discussed terribly recently and I'm asking a redundant
> >question:
> >
> >I'd like to put a Schaeffer panel on a rack mount device, but I'd also
> >like a rack enclosure.  Seems to me that most enclosures also include the
> >rack panel.  Is there somewhere I could just get the enclosure?
> >
> >Thanks,
> >Scott
> >
> >
> >
> >________________________________________
> >PeoplePC Online
> >A better way to Internet
> >http://www.peoplepc.com
>
>          -Jim
> ***************************************************************
> http://www.oldcrows.net/~patchell
>
> ***************************************************************
>
>