[sdiy] [Fwd: FS: Massive Synth/Recording-DIY collection]

[tuj at fuse.net]

Figured someone on this list might be interested.  Fowarded message below.  Please do not reply to me.


> 
> From: toothpaste at toothpastefordinner.com
> Date: 2004/12/17 Fri PM 06:00:49 GMT
> To: analogue at hyperreal.org
> Subject: [AH] FS: Massive Synth/Recording-DIY collection
> 
> 
> 	This is a collection I've amassed over the past 4-5 years. It is 
> massive in scope and is almost exclusively focused on parts used to 
> build/repair analog synths and recording gear.
> 
> 	Would someone please forward this to the Synth-DIY list for me, 
> pretty please? I de-subbed to it a while ago as my interest in DIY has 
> waned, but I would like the folks over there to be able to see this too.
> 
> 	I am asking $249 for the collection, plus shipping ($30 UPS within
> the USA should cover it.) It is a ridiculous amount of parts which are all
> individually bagged (took me hours). If you want to pick up in Columbus
> OH, you can have the parts drawers that these originally resided in.
> 
> 	Here we go...
> 
> ALL QUANTITIES ARE APPROXIMATE! Expect to vary within +/-20%. I have 
> estimated conservatively. Small quantities are exact. All parts are new 
> and unused unless otherwise marked. ALL PARTS ARE DIP/through-hole. 
> Resistors are mostly 1/4 watt but some values are mixtures of 1/4 and 1/8 
> watt.
> 
> Transistors:
> 2n3904 - 30
> 2n3906 - 30
> 2n5087 - 15
> 2n5088 - 60
> 2n5089 - 50
> TIS93 - 50
> BC549B - 20
> 2N5458/5457 - 10
> MPSA14 - 25
> misc FET (2N3819, MPF102, J201) - 10
> misc regulator (317/337/78xx/79xx) - 20
> misc PNP/NPN/Darlington - 10
> misc Japanese (pulled from old Roland/Korg gear, some rare stuff here) - 
> 40
> 
> total: about 350
> 
> 
> ICs:
> 
> OPAMPS-
> BA324 (industrial spec LM324) - 25
> BA358 (" " LM358) - 20
> BA393 - 8
> TL064 - 50
> TL084 - 9
> CA3080E - 10
> BA662 - used, 1
> TL072 - 30
> NE5534 - 20
> NE5532 - 20
> 
> Burr-Brown chips-
> 2x OPA627
> 3X OPA2228
> 3X OPA2604
> 3X OPA2134
> 
> misc-
> LM301 - 5
> LF353 - 4
> CA3046 - 6
> CD4046 - 1
> CD4069 - 1
> CD4538 - 1
> MC4013 - 1
> HDC4016 - 1
> LM555 - 5
> LM386 - 7
> XR2209 (LFO chip from exar) - 2
> MC1496 (ring mod chip) - 3
> 
> MAXIM chips: 2 each of MAX274A, OP07, OP27, OP37, MXL1013, MXL1007, 
> MAX427, MAX038
> 
> 
> 
> total: about 220
> 
> 
> IC sockets:
> 8 pin - 31
> 16 pin - 12
> 18 pin - 4
> 
> total: about 47
> 
> 
> caps:
> 
> Polystyrene film kit PS-KT1 from Xicon
> (120 caps from 100pF to 820pF, only used a couple out of it)
> 
> 680pF ceramic - 100
> 10u 25V electro - 70
> about 50-100 each of these 16v electros:
> 1u, 2.2u, 3.3u, 4.7u, 10u, 22u, 100u, 220u
> 
> 10pF axial ceramic caps - 17
> 100pF axial ceramic caps - 95
> 0.47u 50V radial tantalum - 10
> misc. polystyrene caps, many values from 0.001u to 0.1u+ - 150
> 
> total: about 600-700
> 
> resistors (in ohms):
> all are 5% tolerance, 1/4 or 1/8 watt
> all are bagged by value , *NOT RANDOMLY THROWN IN A BOX!!*
> approx. 500 each: 1M, 22k
> 
> approx. 200 each of the following values (each of these are individually 
> bagged and some are still labeled with mouser codes):
> 39, 100, 120, 330, 820, 2.2k, 3.3k, 3.9k, 4.7k, 5.6k, 8.2k, 10k, 12k, 15k, 
> 20k, 33k, 47k, 82k, 91k, 100k, 120k, 150k, 180k, 220k, 330k, 470k, 510k, 
> 620k, 680k, 750k, 1.2m, 1.8m, 2.7m, 3.3m, 3.9m
> 
> and 50-100 each of almost any of the intermediate values not listed here. 
> decades of 1, 2.2, 3.3, 4.7, and 6.8 mostly, with some weirder ones thrown 
> in here and there. so 1k, 6.8k, 68k, etc.
> 
> total: about 5000+
> 
> 
> 
> switches/pots:
> 
> mini Mountain Switch toggle switches:
> DPDT on-off-on: 4
> SPDT: 7
> DPDT: 4
> 
> 2p6t rotary switches (mouser 10WW026) - 7
> 
> potentiometers- mostly 16mm/25mm Alpha, about 50 total
> values- 500, 1k, 5k, 10k, 50k, 100k, 500k, 1M, 2M
>  
> 
> hardware:
> 2000 - 4-40 x 1/4" pan-head slotted screws
> 2000 - matching nuts
> 
> 
> 
> misc:
> 
> Vactrol VTL5C2 - 30
> 6N139 (optoisolator) - 1
> 1N914/4148 diodes - 200
> CdS photocells - 20
> 9VDC, 250mA, 2.1mm center-positive 120VAC adapters - 20
> 
> 
> pad-per-hole boards from Small Bear Electronics:
> 1.5"x1.5": 10
> 1.5"x3": 10
> 3"x4.5": 6
> 
> 
> 
> 
> 	
> 	thank you for the bandwidth. I hope someone will purchase and
> enjoy this 'cause I haven't had enough time or energy in my life lately to
> do so myself. :)
> 
> 	drew
> 
>