[sdiy] Tempcos

[damion at poweracoustics.org]

Thanks for the info Tony...
Funny, but the reason I originally joined this list was to find a 
source for cheaper tempcos.
I actually ended up going with the surface mount ones (super cheap, but 
a little bit of a pain to deal with..)
The ones Jay was offering were cheap enough that I figured that I'd get 
some of those too.

As for Jay, I just got an email from him and apparently he plans to 
make good on his transactions.
Maybe the others got an email from him too??


Damion



On Dec 16, 2004, at 1:09 AM, Oakley Sound wrote:

> Without wanting to sound like the bit in Spartacus...
>
> I sell the 1K KRL wire wound temp cos too.
>
> But I'm out of stock until mid January. If you can wait that long feel
> free to order some. I sell mine at 6UKP each. With the state of the US
> Dollar, Paul will be cheaper and faster then me right now...
>
> If you need 2K temp cos, then Midwest Analogue is a good source.
>
> If you can deal with +3000ppm/K then Farnell and its many subsideries
> will sell those. Look under temp sensors in the catalogue. These are 
> the
> smaller types that look like an ordinary 1/4W resistor. You can get the
> 1K version off me singularly too at 2UKP each.
>
> If you can deal with surface mount ones in both +3000 and +3900 then
> Farnell will provide these too.
>
> Remember you can tease the higher TC down to 3350 with a resistor in
> series with the TC, or by feeding it with a lower resistance when the 
> TC
> is used in a standard attenuator.
>
> Regards,
>
> Tony Allgood                           www.oakleysound.com
>
> Oakley Modular Synthesisers      Penrith, Cumbria, England
>
>
damion romero
damion at poweracoustics.org
http://poweracoustics.org
http://p-tapes.com