[sdiy] Tempcos

[Oakley Sound]

Without wanting to sound like the bit in Spartacus...

I sell the 1K KRL wire wound temp cos too.

But I'm out of stock until mid January. If you can wait that long feel
free to order some. I sell mine at 6UKP each. With the state of the US
Dollar, Paul will be cheaper and faster then me right now...

If you need 2K temp cos, then Midwest Analogue is a good source.

If you can deal with +3000ppm/K then Farnell and its many subsideries
will sell those. Look under temp sensors in the catalogue. These are the
smaller types that look like an ordinary 1/4W resistor. You can get the
1K version off me singularly too at 2UKP each.

If you can deal with surface mount ones in both +3000 and +3900 then
Farnell will provide these too.

Remember you can tease the higher TC down to 3350 with a resistor in
series with the TC, or by feeding it with a lower resistance when the TC
is used in a standard attenuator.

Regards,

Tony Allgood                           www.oakleysound.com

Oakley Modular Synthesisers      Penrith, Cumbria, England