[sdiy] DW-6000

[Ian Fritz]

At 05:22 AM 8/16/2004, Rainer Buchty wrote:

>You can clear out the holes even more easily: get medical needles in
>appropriate sizes, put them on the hole, and heat the hole with the
>solder iron until the needle glides through. You can then just pull out
>the needle and leaving a clean hole cause the medical steel rejects
>solder.

A similar method is to get a disused dental scaler.  They usually throw 
them away, because it is less expensive to buy new ones than to get the old 
ones resharpened.  Just ask your hygenist or dentist to save you one!