[sdiy] Magnetic field

[Czech Martin]

Note the word :probing.
I.e. during manufacturing.
There is no interface etc. on the Micronas chip,
it simply looks like very much tighter spec
and distribution.
The customer can not program it.


m.c.

> -----Original Message-----
> From: Ian Fritz [mailto:ijfritz at earthlink.net]
> Sent: Montag, 2. August 2004 16:53
> To: Czech Martin; synth-diy at dropmix.xs4all.nl
> Subject: RE: [sdiy] Magnetic field
> 
> 
> At 08:26 AM 8/2/2004, Czech Martin wrote:
> >The hall sensors from Micronas have even a DSP and OTP included,
> >so manufacturing tolerances can be compensated during probing.
> >
> >I do not know if you can get any in low quantities, though.
> 
> DigiKey has programmable linear Hall sensors from Melexis.  
> Starting at 
> only $8.60. :-)
> 
> 
>