[sdiy] Moog Movie info

[Tim Parkhurst]

> -----Original Message-----
> From: Peter Grenader [mailto:peter at buzzclick-music.com]
> Sent: Tuesday, August 24, 2004 12:07 PM
> To: Tim Parkhurst; synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] Moog Movie info
> 
> So much for ESD protection at the House of Moog, huh? Well, heck - he's
> earned the right to blow a few boards to kingdom come.  Anyway, it's a
great
> thing what's happened to him..
> 
> I heard they were going to make one on Buchla, too - but the film maker
> found that Don's  image doesn't show up on film.  Weird.
> 
> - P
> 

He does give that PCB a couple of good thwacks, don't he? Actually, once all
the components are soldered in place, a PCB is not as easily damaged by ESD
(not to say it's impossible, but the components are slightly safer). Still,
I was grimacing as Dr Bob whacked the PCB a couple of times and then tucked
it under his arm. My guess is 1)it was a bad PCB already or 2)he's Bob Moog,
so he can beat up and zap as many of the things as he wants! Great trailer
though. I really want to see this when it comes out!


Tim (whacking the old PCB) Servo
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.713 / Virus Database: 469 - Release Date: 6/30/2004
 



***************************************************************************
This message is confidential.  The information contained in
this e-mail message is intended only for confidential use of the
recipient(s) named above. If the reader of this message is not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this document in
error and that any review, dissemination, distribution, or copying of this
message is strictly prohibited.  If you have received this communication in
error, please notify us immediately by e-mail, and delete the original
message.
***************************************************************************