[sdiy] Dumb PN3566 question

[phillip m gallo]

Peter,

Digikey has the part listed as a std T0-92 EBC

http://dkc3.digikey.com/PDF/T041/0584.pdf

Mouser crosses it to Central Semi's PN3566 which confirms this

http://www.centralsemi.com/leadedpdf/LSSGP076.PDF


regards,
p


-----Original Message-----
From: owner-synth-diy at dropmix.xs4all.nl
[mailto:owner-synth-diy at dropmix.xs4all.nl]On Behalf Of Ken Stone
Sent: Thursday, April 29, 2004 10:22 PM
To: Peter Grenader
Cc: synth-diy at dropmix.xs4all.nl
Subject: Re: [sdiy] Dumb PN3566 question



>I've got a PN3566 stuffed into a filter that sounds like cr at p.
>
>It'a a fairchild, and I've course the datsheet is not on their site to
tewll
>me the pin configuration, although I'm used to the typical 'PN' switch
>around.

unfortunately the Fairchild transistor book I have fails to give pin-outs!!
It has a generic reference at the rear that gives three different
arangements, and gives no idication of which is used where. Obviously a
moron was at the wheel when this was put together.

Ken
_______________________________________________________________________
Ken Stone   sasami at hotkey.net.au or ken at cgs.synth.net
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.656 / Virus Database: 421 - Release Date: 4/9/04

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.656 / Virus Database: 421 - Release Date: 4/9/04