[sdiy] Dumb math question

[James Patchell]

No, it would be the sum divided by three....to get an average, you need to 
keep a running sum, which would mean an integrator would need to be in the 
circuit...gee....actually just adding a capacitor in the feed back loop 
will do this....as long as the signals are higher in frequency than the 
cutoff frequency, you will get sort of an average.

At 04:31 PM 4/26/2004 +0200, jbv wrote:
>Consider a 3 inputs mixer built around an op-amp,
>with a gain attenuation by a factor of 3.
>Can the output be considered as the average of the
>inputs, like in maths one can calculate the average
>of 3 values ?
>
>Thanks,
>JB

         -Jim
***************************************************************
http://www.oldcrows.net/~patchell

***************************************************************