[sdiy] Beginners project questions

[Ryan Williams]

Tentochi wrote:
> The problem with using Oakley for your first module is that you have to do
> almost everything on your own (much worse if you just have schematics, no
> documentation and no printed circuit board (PCB)).  

like Paul said, thats not even close to being right.  I've got some 
oakely PCBs rigtht here, and the documentation is straightforward. I 
built an Oakley VCO for my first ever module and there was no problems 
on that. Picking parts is the only thing that was tricky at first and 
for most modules you won't even have to do that.

-Ryan