[sdiy] Steiner VCF

[Peter Grenader]

This is exactly what Cynthia did

- P

J. Larry Hendry wrote:

> Ken Stone sells a Steiner VCF PCB with the 3 inputs.   I have one on order
> and plan to build it with an all pass mode.  I plan to configure the front
> end so that when you insert in the all pass socket, you hit the input of all
> 3 inputs LP, HP, and BP with attenuators on each.  Additionally, I plan a
> mix between the AP and dry signal.  Don;t know if that will be interesting,
> but I'm going to try it. :)
> Larry H
> 
> 
> ----- Original Message -----
> From: Scott Stites <scottnoanh at peoplepc.com>
> To: Yves Usson <yves.usson at imag.fr>; <synth-diy at dropmix.xs4all.nl>
> Sent: Wednesday, April 21, 2004 1:21 PM
> Subject: Re: [sdiy] Steiner VCF
> 
> 
> This is cool stuff, Yves, thanks for posting it!
> 
> -----Original Message-----
> From: Yves Usson <yves.usson at imag.fr>
> Sent: Apr 21, 2004 10:02 AM
> To: "David J. Hughes" <hughes_david_j at btopenworld.com>,
> synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] Steiner VCF
> 
> This a repost because I had problems with my sendmail and
> I am not sure it went through the first time ! Sorry for the duplicate
> if any !
> 
> Hi David
> 
> Actually, I have no plan for selling PCBs, I am doing this as a hobby
> and
> I engrave my PCBs myself. To envisage selling PCBs I would have them
> made
> by a specialized company and be prepared to order big batches in order
> to
> cut down prices!
> 
> I am not sure ... if a lot of people are interested why not ?
> 
> Regards
> 
>> 
>> Do you have any plans to sell the PCB's? I would like a couple for
>> beefing
>> up a couple of old analogues I'm fixing up.
>> 
>> Regards
>> David
>> 
> -------------------------------------------------------------
> Yves Usson
> 
> Lab. TIMC UMR5525 CNRS
> Institut d'Ingéniérie et de l'Information de Santé (IN3S)
> Faculté de Médecine
> Domaine de la Merci
> 38706 La Tronche cedex
> 
> email : yves.usson at imag.fr, yves.usson at ujf-grenoble.fr
> 
> tel.  (+33) (0)456 520 074
> fax.  (+33) (0)456 520 022
> 
> 
> 
> 
> PeoplePC Online
> A better way to Internet
> http://www.peoplepc.com
> 
> 
>