[sdiy] Pot Shaft Adapters? Davies 1900h

[Cynthia Webster]

Hi There!

Thanks everyone for the info on the 1/8 to 1/4 shaft adapters.

They arrived today and I am happy to say that they work great
with the Davies 1900h knobs that Modcan, Serge, Wiard, and I use!

Best Wishes!

Cynthia


on 4/7/04 12:16 PM, Oren Leavitt at oleavitt at ix.netcom.com wrote:

> Hi Cynthia,
> 
> Mouser has them: Mouser Part# 506-KR1
> http://www.mouser.com/catalog/617/1030.pdf
> 
> Ocean State Electronics also has them:
> http://www.oselectronics.com/ose_p101.htm
> 
> HTH,
> Oren
> 
> -----Original Message-----
> From: Cynthia Webster <cynthia.webster at gte.net>
> Sent: Apr 7, 2004 9:22 AM
> To: DIY <synth-diy at dropmix.xs4all.nl>
> Subject: [sdiy] Pot Shaft Adapters?
> 
> Howdy!
> 
> Anyone know a source of 1/8 inch -to- 1/4 inch Shaft Adapters?
> 
> I recently added Dave Hylander's excellent expander card to
> a Modcanized Miniwave, and was lucky enough to find a tiny
> 10-position rotary switch that fit the same hole in the
> front panel as the original mini toggle!
> (Cool, No hole-drilling to the original module panel required)
> 
> The downside is that the new rotary switch has a small shaft,
> (.125) and the Davies 1900h knobs are all too large, (.250)
> 
> I just *know* that I've seen these somewhere,
> anyone have suggestions?
> 
> Thanks!
> 
> Cynthia
> 
> 
> 
>