[sdiy] MOTM-800 clicks. Arg!

[Czech Martin]

Well, I assume that the VCA is trimmed already.
Due to drift, aging and mismatch in the die
there will be always some residual feedthrough.
I think.

m.c.

> -----Original Message-----
> From: René Schmitz [mailto:uzs159 at uni-bonn.de]
> Sent: Freitag, 17. Oktober 2003 12:09
> To: Czech Martin
> Cc: Aaron Day; synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] MOTM-800 clicks. Arg!
> 
> 
> Czech Martin wrote:
> 
> > Remedy: ensure via synchronisation that
> > the VCO starts at zero when the fast envelope does the transient
> > start. So the clicks should be much less audible (well,
> > VCA feedthrough will stay, of course).
> 
> THe TM116 has an output labelled "trigger" which puts out a 
> very short 
> duration pulse to sync oscillators. And VCA feedthrough can 
> usually be 
> trimmed.
> 
> Cheers,
>   René
> 
> -- 
> uzs159 at uni-bonn.de
> http://www.uni-bonn.de/~uzs159
> 
> 
> 
>