[sdiy] Mods

[Oakley Sound]

> Is there any mods at the list for the Transcendent 2000?

Its worth doing these component changes if you have a T2000:

These are the new values to use.

R129 33K
C26 470nF, 63V polyester
R80 10K
R81 10K
R82 10M

You'll need to re-adjust RV22 for minimum thump on the VCA when using
fast attack and decay.

This will give you a much better overdriven sound and better signal to
noise too. Standard T2000 sound can be obtained easily by knocking back
the VCO level to about 80% or so.

Regards,

Tony Allgood                         www.oakleysound.co.uk

Oakley Modular Synthesisers      Penrith, Cumbria, England