[sdiy] Ohms-Per-Volt

[Glen]

At 11:16 PM 5/29/03 , KATAYAMA Takuya wrote:
>Hi Glen and the List!
>
>It is very easy.
>
>Connect a 1,000 ohms resistor in parallel to your DMM.
>Maybe your DMM input impedance is very much greater than
>1,000 ohms, so it acts like what required.
>No PRESITION resistor needed, ordinary carbon film 1/2W 
> type is recommended.

That would only work if the original meter measured a maximum of 1 volt, at
full deflection. 

later,
Glen