AW: [sdiy] MonowaveII demo sounds up

[Ullrich Peter]

I made my first step into the DSP world with the Analog devices ADSP2181
evaluation boards.
Also has sterao ADC and DAC onboard.

The advantage of the ADSP-Chips was the nice assembler. It doesnot look like the

Assembler commands on the motorola and texas chips - looks more like a high
level language
but had the same efficiency.

I started a monophonic synth but stopped due to a lack of time after the DCO
(sawtooth, PWM)
and simple ADSR. The VCF part is programmed but never tested.
So I stopped before the interesting work began...

There is a music-dsp group in the net that added flash programming possibility
to this board.

Ciao
Peter

        \|/
       (o o)
--oOOO--(_)--OOOo------------------------------------------------------
                   Ing. Peter Ullrich   mailto:peter.ullrich at kapsch.net
                   Homepage: www.ullrich.at.tt , http://come.to/ullrich
                   As of 1st of February there are new numbers:
                   Phone: +43 (0)50 811 2265   Fax: +43 (0)-50 811 2209
                   eFax:  +43 (0)50 811 992265
   .oooO           Hardware & Software Developer /  Electronic Musician
   (   )   Oooo.   Kapsch TrafficCom AG                 Vienna / Austria
    \ (    (   )   http://www.kapsch-trafficcom.com/
-----\_)----) /--------------------------------------------------------
           (_/

This e-mail and any attachment and the included information are confidential,
protected by copyright and intended solely for the use of the named
recipient(s). If you are not the named recipient any disclosure, copying,
distribution or retention of this e-mail is prohibited and may be unlawful. If
you are not the intended recipient, please inform us immediately, delete this
e-mail and all attachments from your system, and refrain from taking any other
action in reliance to this e-mail.