AW: [sdiy] help for poly800

[Ullrich Peter]

Hi!

>i recently fixed my poly800 - broken opamp in the CVdemux section...
>now it still needs some adjustment and there are just too many trimmers on the 
>boards.
>i would be happy to read the service manual but i had no luck when i tried to 
>find it via google..
>
>someone who can help me out ?

I can send you the schematics if you want (about 1MB).
Please let me know if that is OK and I will send it to you per private email.

Ciao
Peter

        \|/
       (o o)
--oOOO--(_)--OOOo------------------------------------------------------
                   Ing. Peter Ullrich   mailto:peter.ullrich at kapsch.net
                   Homepage: www.ullrich.at.tt , http://come.to/ullrich
                   As of 1st of February there are new numbers:
                   Phone: +43 (0)50 811 2265   Fax: +43 (0)-50 811 2209
                   eFax:  +43 (0)50 811 992265
   .oooO           Hardware & Software Developer /  Electronic Musician
   (   )   Oooo.   Kapsch TrafficCom AG                 Vienna / Austria
    \ (    (   )   http://www.kapsch-trafficcom.com/
-----\_)----) /--------------------------------------------------------
           (_/

This e-mail and any attachment and the included information are confidential,
protected by copyright and intended solely for the use of the named
recipient(s). If you are not the named recipient any disclosure, copying,
distribution or retention of this e-mail is prohibited and may be unlawful. If
you are not the intended recipient, please inform us immediately, delete this
e-mail and all attachments from your system, and refrain from taking any other
action in reliance to this e-mail.